squirrelf3d posts
Posts: 136
Files: 775
Adjustable printed Single/Dual Z motor mount
My newest revision (re-made from scratch) of a single/dual Z motor mount.Learning from my previous iterations. so this is technically v3 6x M3x8 2x M3 t-nuts Print in PETG or better - NO PLA high infill 30% or moreThere's now an optional 2mm plate that goes below the motor, so the motor can sit right on it.If you d...
Example of a Klipper config
edit: This was an older version of klipper running, and I just updated, the dual color setup here won't work anymore. , things are depreciated in the latest version of klipper. But the rest should still be valid Posted by request.This is not to be used as is. it's a mess, but a beautiful working mess for my set...
TitanOrbiter - Beta - dual 4010
---Update May 2nd: - untested yet, but should work updated ducts (different from the zip model): Right duct - new.stl Left duct - new.stl Same update but with volcano height ( with normal non-volcano main body): right_volcano_new.stl left_volcano_new.stl---I've decided that all future iteration of the shroud will b...
Phaetus TaiChi - Dual color hotend Slicer/Klipper info
ApolloLander and Apollo mini also now supports it ( recommended over the Saturn and titan ) ----- ------------------------- -----Some tweaked values: (JUL 2022)Thanks to KStank (aka Kris Stankievech), Not tested by myself, but I trust his findings.MMU Tool change String reduction Skinnny dip enabled Insertion Distance:...
Phaetus TaiChi, dual Color Hotend on SaturnOrbiter
The hotend mount is done and working great (will be added to the SaturnOrbiter files very soon)Initially thought it would be a crazy setup with dual direct drive, but turns out it's not bad at all. Does look beasty though!I needed a second extruder, so I scavenged parts from a BMG clone to make my own sherpa mini a...
Impossible print with the SaturnOrbiter !?
Saw a post on the ender3 subreddit of someone printing an ornament with a single line contact edge, looked insane and thought it was worth the challenge of trying it myself just for fun and a good trial for the SaturnOrbiter.A 20mm cube on it's edge was surprisingly easy, and worked the first time. but upping the s...
SaturnOrbiter showcase
Just showing off some rendersInstructions hereSTLs hereThe TitanOrbiter can and will support all the following as well - for now by requestSupported direct drive: Orbiter 1.5 Orbiter 2.0 Sherpa Mini BMG and bowden setup (if unsupported just send me a request)Supported Printers / Backplates Ender3 Ender3pro Ender3v2 CR1...
MarsOrbiter STEP file
STEP file for the MarsOrbiterVersion for Ender3/pro/v2 with orbiter extruder mount, integrated bltouch, stock and dragon hotendMarsOrbiter_ender5_noprobe.step remixed by Kevin
SaturnOrbiter instructions
STLs here-----This is a tiny bit outdated, should still give you most of the info needed, heat insert count is probably off (Bltouch offset have been updated ) , if you have doubts on anything don't ever hesitate to contact me on discord.And heat inserts can now both be 4.6mmOD or 5mmOD, but still 4mm long = ( 5.7m...
Crazy concept idea - Phaetus TaiChi dual color Dual Direct Drive
Phaetus is soon to release the TaiChi hotend, a dual color one, and this popped in my mind, Dual Direct drive with two orbiter extruder 2.0 (since it's smaller, but could probably work with orbiter extruder 1.5 or dual sherpa mini )I don't know how doable it would be in reality, but fun to think about.This beas...
SaturnOrbiter (STLs)
-------------------This is considered obsolete, use the APolloLander instead which is more user friendly, has the same feature set and more--------------------You'll find print/built instruction here Latest zip (8/23/2022): SaturnOrbiter_ender3_pro_v2_ender5_CR10v1_2022-09-28.zipand step file here (this is for stoc...
SaturnOrbiter - New shroud in the making, spiritual successor to the MarsOrbiter
Edit: the beta is out, become a second level membership and you'll get access to it. Thanks in advance for your support!!This is what the earlier pototype of the boxy shroud turned into, I present to you the SaturnOrbiter, dual 5015 like the MarsOrbiter, but laid-out differentlyStill has a few things that needs twe...
MarsOrbiter - Installation Ender3/pro/v2 Cr10
Base Screws: 4x~6x - M3x6 - M3x8 will work too, they will just stick out the back (mounting to backplate and mounting hotend, ender3v2 has two extra optional mounting places for extra rigidity) 1x - M3x8 (connecting two printed part together) 4x - M3x30 (front fan)Orbiter 1.5: 2x - M3 nuts 2x - M3x10 - M3x12 will dig i...
Boxy - early prototype stage shroud
Even though it looks is quite different from the Mars Orbiter style wise, it support the same setups. This is just to layout things and test tolerance. dual 5015 multiple hotends orbiter extruder 1.5 & 2 , sherpa mini, BMG easy to print, with no supportBut has some advantages, tigher tolerance for 5015, yet easier to i...
CAD dimensions reference
last updated: Dec 28, 2021There are things you learn when doing CAD for 3D printing, only after lots of trial and error or looking at other cads and how they did it (but then you have to trust they did it correctly). This is a reference of things that are solid and tested.All models forward will be using these, but old...
Mars Orbiter (STLs)
dual 5015 blower No print support and easy to print. Added rigidity with a two part print Printersender3 ender3pro ender3v2 CR10 microswiss direct drive mounting plate any printer with 20x20 aluminum extrusion on X, you can by an aftermarket ender3 mounting plate for cheap on ali does not reduce printing surface area!...
