squirrelf3d
patreon
SaturnOrbiter showcase
🕑 Added 2022-01-18 20:49:49 +0000 UTCJust showing off some renders
The TitanOrbiter can and will support all the following as well - for now by request
Supported direct drive:
- Orbiter 1.5
- Orbiter 2.0
- Sherpa Mini
- BMG
- and bowden setup (if unsupported just send me a request)
Supported Printers / Backplates
- Ender3
- Ender3pro
- Ender3v2
- CR10 (the original one and iteration with the same black mounting plate, not the blue plate)
- Ender5plus (and most likely other iterations)
- Ender3Max (additional hotend support by request, currently Dragonfly BMS and all rigid mounted hotend:dragon/dragonfly BMO/Rapido/RevoVoron)
- PrinterMod MDD v1.3 for ender3v2
Supported Hotend
Each hotend has been catered individually for the best fit
- Stock ender3/pro/v2
- Creality Spider
- Microswiss all metal hotend
- E3D RevoVoron (rigid mount)
- E3D Revo6
- E3D V6
- E3D V6 Volcano (might need further tweaking)
- SliceEngineering CopperHead
- SliceEngineering Mosquito
- Phaetus Dragon - Rigid mount
- Phaetus Dragon - Groove mount
- Phaetus Dragon HF/UHF - rigid mount ( coming soon )
- Phaetus DragonFly BMO - Rigid mount
- Phaetus DragonFly BMO - Groove mount
- Phaetus DragonFly BMS (integrated spacer)
- Phaetus Dragonfly HIC HF
- Phaetus TaiChi Dual Color (integrated spacer) - also Dual direct drive by request
- Phaetus Rapido HF - rigid mounted
- Phaetus Rapido UHF - rigid mounted
- BigTreeTech - Dual Color ZSYong 2 In 1
- Haldis 3D Red Lizard V3 Pro
- Mellow NF Crazy Pro
- Mellow NF Crazy Plus
Comments
Thank you for this beautiful work. I used my rather janky Manta shroud to print this one and it's rock solid. I assembled it and routed all the wiring in the stock harnesses within 3 or 4 hours. Assembly is super simple. The cable management is so clean. Outstanding work.
Squirrelf
Should be! I'll take a look when I get back at the end of the month.
Chris H
I'm using the Mars Orbiter on my Ender 3 Pro (works well), but would like to use the SaturnOrbiter on my CR-10s Pro. Is it possible to modify it to attach to the CR-10s Pro backplate? the plate is larger and would allow for more mounting points. I found a CAD drawing of the backplate https://grabcad.com/library/cr-10s-pro-hotend-baseplate-1
