Leaqio.com
ozzy3d from fanbox

ozzy3d

fanbox

ozzy3d posts

Posts: 262 Files: 689
ozzy3d post When I'm motivated (Picture release) from fanbox

When I'm motivated (Picture release)

~Uncensored link at bottom~ Grapple pic #3 is here and it's like a weight off my shoulders. I was rendering like a mad man over super small details like the brightness of her arms, the consistency of her pants between shots (which I matched by maybe 40%), and more. Details you wouldn't even think about, like r...

ozzy3d post Taking clothes off (almost done) from fanbox

Taking clothes off (almost done)

Hi, HCs. I understand it's been a week without an update. Time goes by yet progress remains slow. I might have to throw in a different scenario and woman while I still keep this series going. I don't want to give up on it. I have the first part of the pic rendered. I've considered minor tweaks here and the...

ozzy3d post Still here (preview of next pic) from fanbox

Still here (preview of next pic)

Hello. I let the days go by before posting since I had barely anything substantial to show after the pitfall I got into. I have since decided that my mind is not in the right place to tweak a pose for an alternate shot and thus am moving on to the next one. This time it's a face-sit from two angles. I want to sta...

ozzy3d post This hurt (crypto collapse) from fanbox

This hurt (crypto collapse)

Hi, all. If any of you dabble in cryptocurrency, you're probably aware of the massive crashes that took place during these past couple of days. While most of the damage on my side was avoided (I never purchased any of the coins that suffered the worst e.g. Luna, TUSD), it still put a huge dent in what I did put inv...

ozzy3d post Procrastinated like I was back in Uni (New Pics) from fanbox

Procrastinated like I was back in Uni (New Pics)

Hi, HCs. After a much longer than normal wait for a simple pic, I buckled down and finished the final tweaks I needed before rendering. I felt like I was back in school, in that I turned something I could have done in a couple of days into a two-week holdover. That didn't work back in middle / high school (I was a ...

ozzy3d post Happy Mothers Day / Movie Rec / Update from fanbox

Happy Mothers Day / Movie Rec / Update

Hi, all. I wanted to apologize for the massive delay. I had to work at the office today (Saturday) and have already been chastised by my boss for not being dedicated enough. Sometimes it feels like I'm answering to a parole officer instead of a manager. 3D-wise, one of the more anticipated days snuck up on me. I&...

ozzy3d post 1, 2, 3, 4, 5, 6 to put together from fanbox

1, 2, 3, 4, 5, 6 to put together

Today I split my time between watching Age of Empires 2 videos and rendering these split pics. The goal was to have a base pic, then make the adjustments and tweaks as I needed and render those individual changes. It'll all come together at the end, trust me (they're all done that way). I have a regular face f...

ozzy3d post Wedgied from fanbox

Wedgied

Hi, I'm still here. This weekend / start of the workweek required a bit more adjustments than anticipated as my lead has gone overseas for a while. That leaves me as the longest active person out of the crew (exactly one year since I started this job). It's gonna be a little rocky at my job until my lead gets b...

ozzy3d post If I say I'm almost done, it should be ready soon, right? from fanbox

If I say I'm almost done, it should be ready soon, right?

In 3D porn, when things are in the works it's up to the artist to know when to throw in the towel and release it. In my current session, I have what seems to be only a few things to clear, possibly an alternate pose, and then call it good. Should be an easy touch-up that takes barely any time at all, right? Turns o...

ozzy3d post Main and alternate from fanbox

Main and alternate

Hi, HCs. The pose is slowly working its way toward completion. I don't have much to update right now as I'm cramming this post into my schedule before going to bed. Basically, the first pic above is the proper pose I'm doing, while the second is just a quick alternate I put together just to see how it'd...

ozzy3d post Precedence from fanbox

Precedence

I had to do a google search on this one since I'm a little out of touch on these moves. This submission hold with legs is used by a different wrestler, but nonetheless there is precedence for something this over-the-top in WWE. It's not just me pulling this move out of my ass. As if any of this needs some refer...

ozzy3d post Came back from fanbox

Came back

Hi, all. I was out for the weekend. Wanted to get right to animating but other obligations had me unable to work. Short notice. Through this week I'll be trying to set the next pose right. The majority of it is finished, as some of you know from the last post I made. It just needs some body tweaks and such. That&#3...

ozzy3d post 1st pic finished, now for #2 from fanbox

1st pic finished, now for #2

My bad. Yesterday I wanted to upload something but I was in the middle of downloading a video. Couldn't pause it and I had to go to bed. I don't use Pixiv without my VPN active so I had to wait until today. I've got the first pic I in the bag and it has the right color scheme I want. WWE has never gotten ...

ozzy3d post Grapple Preview from fanbox

Grapple Preview

Hi, Hardcores. I spent the day rendering out pieces of the pose I'm doing. It'll be the first pose of many (read: a few). After a few poses, this is the first one that got to the finish line. Now that I know this can be a real thing, I'll do the post-edits and focus on the next pose. I went ahead and also r...

ozzy3d post Not for Nothing from fanbox

Not for Nothing

Hi, all. I was gone for a few days when I only announced being gone for one. Took a little more time off than expected. Today (Sunday) I spent my time throwing ideas at a wall and decided that instead of going for one pic, I'd go for a few. All those time off days weren't for nothing. I needed a gym, so I took...

ozzy3d post Out tomorrow from fanbox

Out tomorrow

Today I got home after a 12-hour shift. It's as if end-of-quarter days are all days now. Not a whole lot of time to unwind and get more things done with only 2-3 hours of free time, of which maybe 1 hour was actually buckling down. Tomorrow (or April 14th, when most of you will see this) I'll be out with a fri...

ozzy3d post Trying out the models (SFW) from fanbox

Trying out the models (SFW)

Today was productive. Out of several shota models (white, latino, black, asian, etc.), I have my main one for these sessions. Might have to extend that to future sessions with other models, as well. It's a jack-of-all-trades shota model. The height seems to be about right, judging by the supportive comments in the...

ozzy3d post Figuring out height from fanbox

Figuring out height

Hello. I didn't do much today cause of time with family, but the rest of this week is toying with stuff like this - trying to match proportions, height, and getting the right pieces in place. I can't throw her into shota stuff without having a proper shota to do it with. I have a few models, but I need one that...

ozzy3d post Moment of Bliss (new session model and details) from fanbox

Moment of Bliss (new session model and details)

Hello, people. Back in the '90s / early '00s I was a major wrestling fan. It was a huge part of my childhood along with video games and other kid stuff. Nowadays, not so much. I haven't paid much attention to it aside from watching lots of older clips and top 10s, most of which anything post-2012 is lost on...

ozzy3d post Shota is King from fanbox

Shota is King

In my last post, I wanted to showcase Jennifer Morrison's Doctor Cameron from the show House. Unfortunately, the results of her likeness kind of fell short. That was me following the same book Bioware used with the "it'll work cause I'm the one doing it". I still like the concept and almost everythi...

ozzy3d post Doctor's Checkup - Fanbox Only (Links) from fanbox

Doctor's Checkup - Fanbox Only (Links)

Sometimes things work, sometimes they don't. For this one I had to go for a couple different angles before realizing that capturing 100% likeness was out of reach. So I went ahead and salvaged what I could with what was on hand. The scenario was a simple doctor's checkup that was far more hands-on than normal...

ozzy3d post Too many girls at once from fanbox

Too many girls at once

Hello, everyone. It's been pretty silent this weekend. Had to do taxes, spend some time with family, game a little, and do 3D work. Each time I had to figure out one session, I'd move on to another. I think at this point I have 4 different individual sessions, none of which are finalized. The closest one to b...

ozzy3d post April session from fanbox

April session

Hi, all. As March comes to a close, the end-of-quarter period is almost over and I can see the light. Still a little distant, but brighter now that the worst has passed. After I put together this AMA, April will be the cooldown period at work where I'll have ample time to take it easy and come back to 3D for a new ...

ozzy3d post Bright Outlook from fanbox

Bright Outlook

Hello. I mentioned yesterday how there was some sliver of good news that I'd quickly remark on today. It goes something like this: I have PTO in April, but it's kind of on-call. If they need me, I'll have to show up. If not, I sit at home to goof off. Expect the worst, hope for the best. My workplace is al...

ozzy3d post Will Things Look Up? from fanbox

Will Things Look Up?

Hi, all. Hands and back hurt, but things might be looking up. I'm eyeing a potentially lax schedule coming up in April. It's on the fence whether or not it'll stay that way, but I'm going to try and take time off to recoup and do a session. I'm trying to form a model that'll go on to make me hap...

ozzy3d post Pain / AMA questions in the meantime / Mac archive of SFM content from fanbox

Pain / AMA questions in the meantime / Mac archive of SFM content

Hi, everyone. 5 days of work has left my hands hurting quite a bit. There's a pain in my left (non-dominant) hand, which I use as my primary hand for 3D stuff (fucked up my right hand years ago doing 3D / bad day job ergonomics). The wrist pain is so bad, I can't even scrap to porn. So I can't guarantee any...

ozzy3d post More Experimenting (settling for 2nd) aka nothing yet from fanbox

More Experimenting (settling for 2nd) aka nothing yet

Hi, all. It's been a week and there's still no session in place. It's me playing with toys. There's a good reason I never stream - I wouldn't even watch it. Recently, WWE 2k22 was released (including PC) and the models look quite good in it. I haven't been an active wrestling viewer since ~200...

ozzy3d post Experimenting with models (read: goofing off) from fanbox

Experimenting with models (read: goofing off)

Hi, all. I sat around with random WIP models to see what'll spark that creative juice. So far, lots of ideas but nothing to commit to. I'll be compiling some stuff over the next few days for environments, props, and other accessories. Hopefully, that helps find a scenario that I can work with. I'm about to...

ozzy3d post Back from a one week leave from fanbox

Back from a one week leave

Hi, everyone. This past week was me taking a small leave. I had no drive to do anything after spending every day working and watching coverage of the war in Ukraine. Seeing the slaughter and tension of a world closer to full-scale war didn't exactly put me in the mood to do porn. Hard to fire up some 3D nudes when ...

ozzy3d post Ukraine / Russia from fanbox

Ukraine / Russia

I'll keep this brief... You don't come for political talk and I'm not the kind of guy to dispense it on a platform like this. We're all fans of 3D porn here, making us share a common interest despite being in different countries all over the world. No doubt I have Ukrainian and Russian fans of my work ...

More Models