Marrion

Work started!

So far it looks like just a stick, but it should be, you will see gradual progress ;)

Next model!

Or even 2 models ;)Just in case, I repeat, poll was on the next one after this one =)

Next model =)

I will announce the next model within 2-3 days.Choose a model for a month AFTER the next one =)Or suggest your own

A little about my creative process

At the beginning of my creative 3D modeling journey, I worked as much as I wanted. And this led to unexpected unpleasant results - a couple of times I burned out. I am a very passionate person. Sometimes it happened that I woke up in the morning, went to model and after a while I noticed that it was already night. I li...

High Elven Warrior Shield

200x200x200 version 400x400x400 versionuncut versionThe shield is ready.With a slight delay to my displeasure.But in the end, I like how reliable I managed to make it.Here are the specs of the shield:width - 536mmheight - 1400mmthickness - 10mmhandle:length - 1300mmdiameter - 30mmThere are 2 handle options for the shie...

Discount!

I want to test the work of discount coupons for CGTrader, so if you wanted to buy something from my work, here's a 30% discount coupon for you ;)43C7A7B1F041https://www.cgtrader.com/marrion

I am very happy to welcome the new Patron!

Thank you for your trust and support =)I also want to ask everyone, if you have any recommendation or advice about Patreon, let me know. There are few of you and I will listen to everyone.I plan to master the creation of time-lapses of work on 3D models in the near future. I've already done a time lapse of the proc...

200x200x200

On this shield, such a cutting option turned out to be much more difficult than it seemed at first glance. I try as much as possible, where possible, to make cuts where they are almost invisible or where it is easy to hide them in post-processing.Most likely this option will be ready tomorrow.

Some thoughts and news.

- I will improve my Patreon page.- I will make one "premium" model per month. If I have time, sometimes I will do the second one - perhaps smaller and simpler.- In the near future, I will indeed be blocking old models for new Patreons, but not now =)- Since there aren't many of you, each of you has a super ...

Welcome post! :)

By becoming my Patron now you will receive one-time access to three 3D models that have been rewards for Patrons over the past three months

-

Thank you so much for your words and your support. It is very important for me to know that you like what I do. It really matters to me that there are people who appreciate my attention to detail. I have always considered this to be my strength, I really like to reproduce everything with high fidelity. And I see confir...

Which model should I make next

(or after one)?

High Elven Warrior Shield

I finally finished the shield!(almost)And it is full-sized - more than a meter in height =)And it turned out just great, I hope you enjoy it as much as I did.The cut version will be out tomorrow, I just didn't have time. If someone wants to print this wonderful shield on a small printer, you can just download these...

Soon ;)

I have already started making this magnificent Elven shield.

High Elven Warrior Shield

By the way... what should I have next? What would you like?

Tomorrow

there will be an announcement of a new model =)

Little good news

I think I got into the early access program to place digital goods directly on Patreon.Hooray!In the near future I will try to move some of my work here. The functionality (as far as I can see now) is still limited, but it is already possible to beautifully design models on the site.

I woke up ^_^

And immediately noticed a slight discrepancy in the model.My fresh perfectionist brain is horrified.I'll replace the files in a few hours.To be fair, it's not scary there, just in some places the pattern sticks out a little more, maybe 0.5 mm or less. It won't be visible, but I want everything to be great.

High Elven Warrior Sword

I made a sword.(and I've corrected the description)It was difficult, but doable. I finally made it to my deadline.The difficulty was that I had two weeks to make the sword, but due to circumstances, I took up the execution of 2 orders in parallel with this sword :)Finishing work on the sword on the last day, I spen...

Work is in full swing

I do three projects at the same time. This situation has its own important positive side - due to the fact that I need to switch from one model to another, I do not have time to get tired of any of them =)

Announcement of the next model

Guys!I got a couple of orders and I think I will survive this month ^_^Thank you for your support and kind words.

Some news

After finishing work on the shield, I realized that I was very close to burnout - it was a very voluminous job, as well as a certain amount of financial difficulties. Financial literacy is not my forte. Therefore, I did not have financial savings "for a rainy day."But I took a couple of days off and am ready to...

2nd Age Gondorian Shield

So, the shield is ready (one-piece, shield and patterns, only patterns)The project turned out to be unexpectedly large-scale and I did not fit into the deadlines that I set for myself and announced here (on Patreon) earlier: on the 10th and 25th, lay out the models.In the future, I really want to and will meet these de...

perfectionism...

Well, I made a shield, exported all the files (and there were a lot of them)And while doing the last renders, I noticed a small detail...My perfectionism choked, then came a chthonic stupefaction, and one after another, overtaking each other and colliding, the stages of accepting the inevitable:Denial and isolationAnge...

Barad-dûr

Barad-dûr timelapse

While the 3d model is in the works, here is another small time-lapse

Hello there!

I'm glad to welcome new Patrons!Thanks for the trust, guys, I understand that there are not many models here yet. But you inspire me to work harder %)The next model is in active work.I wrote above that the models will be on the 10th and 25th of each month. So it will be. I'll catch up with my plans, but I defin...

A bit 2d

Every day, in addition to modeling, I draw. I try to do this for at least half an hour. Since I do this to maintain my own mental health, as well as to maintain and improve my artistic vision - I usually do not publish it. But! Let me share with you another part of my work ^_^

Radagon timelapse

I plan to release models here on the 10th and 25th of each month. On the 10th there will be main projects (so far these are swords), and on the 25th - additional ones (at the moment I'm making a shield).I didn’t have time for the 25th, but the shield will be in the best possible way =)In the meantime, to entertai...

Test post %)

I apologize to anyone who sees this...I'm still trying to figure out the Patreon and make it so that only Patrons can get the content they're meant to =)