Masterwork Tools
patreon
Cut-Stone Stairs
🕑 Added 2020-01-28 16:29:23 +0000 UTCCut-Stone was the first set I did stairs with, but the old stair set was not really optimized for play, it was optimized for look. Well, since then I've gotten both Dungeon Stone and Towne stairs out using the more playable standard that also gives you access to risers for having boards with different heights. It was time to come back to Cut-Stone to bring the new stairs models full circle back to the beginning.
Grab the files on Thingiverse and let us know what you think in the comments!
Comments
Dante Nava
Cool. I'll have to try that. I'd probably go at least 5% like you said and add a top layer. Thanks Devon!
Masterwork Tools
You drop infill to 0%. It does depend on your printer being tuned well enough to do the bridging. You could also try just really low infill like 5%. You would have to experiment with your printer.
Dante Nava
Ok. Not 100% sure what that means but it makes sense. đ Thanks!
Masterwork Tools
yeah. You could try doing a hollow shell in cura.
Dante Nava
Is it the large cubes then? I need to figure out how to print those in a more reasonable amount of time... Thanks!
Masterwork Tools
OpenForgeSupported/tiles/cut-stone/wall_on_tile/stairs Also worth noting the same things are released in dungeon_stone and towne. They are full tiles, not bases. It's an interesting idea, but in this case it's just really thick tiles.
Dante Nava
Where does one find these awesome Risers? I've been wondering how to set up a raised alter or something of the sort but wasn't sure how to accomplish that. Are they like really tall bases, cause I've thought about trying to draw something like that up before. I've also considered putting books under them. Thanks Devon, these look pretty cool too.
