ToHardware
patreon
Starter AC Full Package
🕑 Added 2024-02-28 21:42:41 +0000 UTCI've decided to combine all three generation starter ACs in a single package.
This release comes with a plethora of fixes and additions to the starters, such as:
Support-free parts
Magnet-supported parts*
Various stability and assembly fixes throughout all 3 starters
*The size of magnets that i have gauged these parts for are 3mmx1mm magnets.
There are no instructions on how to implement the magnets, as they are self explanatory upon looking at the files.
In the archives you will find:
500+ PPI STL files of the Starter ACs
Magnet-supported files for their corresponding counterparts
Blockouts of the Starter ACs
Instruction Manuals of the Starter ACs
If you have any questions about the release, don't hesitate to ask. As a reminder, make sure you join the discord for any troubleshooting needs as it's the fastest way to get a hold of me.
EDIT: There were a few geometry errors on both of the Gen 3 cores (CCM-00-STO_C01, CR-C69U_C13 specifically). These issues have been addressed and fixed.
Please re-download Gen 3 Starter.7z to get the fixes.
Thank you.
EDIT2: addressed an issue with the AMS for the CCM-00-STO where the barrel shroud was not properly connected to the barrel.
Please re-download Gen 3 Starter.7z to get the fixes.
Thank you.
EDIT3: The AMS for the CCM-00-STO continues to be stubborn. A fix has been applied to the barrel shroud/furniture of the AMS to prevent cracking during printing.
I forgot to include the magnet-supported parts for the CR-C69U in the previous releases, and that has also been rectified!
Please re-download Gen 3 Starter.7z to get the fixes.
Sorry for all the trouble folks. I appreciate your guys' support, as always.
Thank you.
EDIT4: Addressed a geometry issue for the CR-C75U2_C03 conversion part for the CCM-00-STO. The geometry was improperly exported and required a fix.
Please re-download Gen 3 Starter.7z to get the fixes.
Sorry for all the trouble folks. I appreciate your guys' support, as always.
Thank you.
EDIT5: Addressed a geometry issue with the Gen 1 AN-201 where the elbow connection inserted into the forearm. Said connection is now much more robust. In the process of fixing this issue, I hollowed out the fore arm to eradicated unnecessary fill which now makes these arms much lighter.
Please keep me informed on any potential build issues with the parts so i can address them with fixes.
Thank you again for all your support
EDIT6: Addressed a geometry issue with the Gen 3 CR-C69U 02 parts for both the magnet and normal variants. An improper boolean operation prevented the successful marriage of parts 01 and parts 02.
Please keep me informed on any potential build issues with the parts so i can address them with fixes.
Thank you again for all your support
