squirrelf3d
patreon
DropEffect eXtreme Gradient hotend - rail mount (MGN12h) - ender3/pro/v2
🕑 Added 2022-08-24 21:03:36 +0000 UTC-----
Oct 21: added a belt mount with wider slots
-----
STEP file included
Screw length (might be some small mistake, but should mostly correct)
- 4x M3x... for linear block mount (different length for top and bottom screws, somewhere around 10mm long, but double check)
- 2x M3x25 for hotend mount (use ender3 add-on)
- 4x M3x12 for main part to the belt holder.
- 2x M2x12 (bottom fan screws)
- 2x M2x8 (top fan screws)
- 2x M3x6 - flat head - accessories screws included with the hotend
- 2x M3x25 - hotend mount
- optional M3x6mm - flat head - for extra mounting point - not very accessible but doable - behind everything, has to be installed after the it's mounted on the rail, but before the belt mount printed piece is attached.
Heat inserts - M3, 4mm length, 4.6/5mm OD
- 4x belt mount piece
- 2x for probe
- 2x for hotend mount
--
You will need to relocate the x-enstop, I included a model and step I made
same type of heat inserts as mentioned above
use M3x6
originally from that post link
--
Hotend itself STEP file not included as it's under NDA, once released you can get it from the Phaetus (or maybe DropEffect) website
Comments
Squirrelf
this is dedicated to the Dropeffect XG hotend ( https://dropeffect.phaetus.com/products/xg-hotend )
Hello! Which type of hotend is used in this project?
