sandsuna
fanbox
【2024/09】Progress Update | 進度報告
🕑 Added 2024-09-25 18:19:23 +0000 UTC✨Long post ahead (,,>ヮ<,,)
✨長文警告 (,,>ヮ<,,)
Gaming Shota!
✨I made these stickers for fun, but the reflective effect turned out better than I originally anticipated. I will be including these in the 100k giveaway event!
Oh yeah, I'm told they're water-resistant too ٩(^ᗜ^ )و ´-
✨原本只是好玩才做做看的，結果發現反光的效果比預期的好很多。之後會大量製作並在10萬的粉絲回饋內贈送！
啊對，廠商說這貼紙也防水哦٩(^ᗜ^ )و ´-
Business Card (Part 3) | 名片（Part 3）
✨Finally received these business card samples! Let me go through the pros and cons of them one by one （｡ò ∀ ó｡）
✨終於收到名片貼紙的打樣啦！來一個一個討論不同材質的優缺點（｡ò ∀ ó｡）
✨【Transparent Sticker + Transparent Back】
This was the format I wanted to make since the very beginning, reason being that having a rectangular border makes it fit more like a business card
✨【透明貼紙+透明離型紙】
這是我一開始最想做的款式，原因是長方形的外框比較好當成一般名片收藏
Color | 顏色：9/10
Clarity | 清晰：10/10
Texture | 觸感：3/5
Thickness | 厚度：3/5
Customized Back | 客製化背面：X
Impression | 印象：7/10
✨【Japanese (Handmade) Paper】
I thought it would be unexpectly good, but turned out to be the worst out of all six
✨【和紙貼紙】
原本以為觸感特別好會是匹黑馬，結果這大概是六款裡最慘的一款
Color | 顏色：4/10
Clarity | 清晰：2/10
Texture | 觸感：4/5
Thickness | 厚度：2/5
Customized Back | 客製化背面：X
Impression | 印象：3/10
✨【Laser + Matte Finish】
Same combo as Gaming Shota sticker, the effect is surprisingly good as well. It's the one that's most likely to be produced in large quantity out of the six. Only unfortunate part is that the laser effect makes the character's skin look a bit desaturated
✨【雷射+霧膜貼紙】
跟Gaming Shota貼紙一樣的組合，效果一樣意外地好，是六款裡面最有機會量產的一款，唯一可惜的是角色周圍的雷射效果導致膚色看起來有點灰
Color | 顏色：7/10
Clarity | 清晰：10/10
Texture | 觸感：3/5
Thickness | 厚度：4/5
Customized Back | 客製化背面：O
Impression | 印象：9/10
✨【Laser + Glossy Finish】
I actually didn't order this one, but the manufacturer seems to insist that I should try out the glossy finish, cause they believe it gives a better laser effect so they made it for me for free.
Forgive me, for I still prefer the matte finish (
✨【雷射+亮膜貼紙】
我其實沒有訂這款，但廠商好像挺堅持說亮膜雷射效果比較好，就免費幫我做了
抱歉我還是比較喜歡霧膜（
Color | 顏色：4/10
Clarity | 清晰：8/10
Texture | 觸感：3/5
Thickness | 厚度：4/5
Customized Back | 客製化背面：O
Impression | 印象：5/10
✨【3M Reflective Sticker】
The most expensive one of them all, I had high hopes for this. Unfortunately, the noise seriously undermined the readability, and even under a light source, it's not really _that_ bright. On top of that, the white feels a bit grayish
✨【3M 反光貼紙】
裡面最貴的一款，原本挺期待的，可惜雜點太多大幅降低可讀性，而且其實在光源下沒有特別亮，白色本身也有點灰灰的
Color | 顏色：6/10
Clarity | 清晰：2/10
Texture | 觸感：3/5
Thickness | 厚度：4/5
Customized Back | 客製化背面：X (3M)
Impression | 印象：6/10
✨【Static Electric Removable Adhesive】
Apparently you can restick this sticker many times due to how the adhesive works. The color is the closest to the vibe I wanted to go for, unfortunately the details aren't very clear.
✨【靜電 R 膠貼紙】
據說是可以重複撕貼，顏色是最接近我原本想傳達的氛圍，可惜細節不是很清晰
Color | 顏色：10/10
Clarity | 清晰：8/10
Texture | 觸感：3/5
Thickness | 厚度：4/5
Customized Back | 客製化背面：O
Impression | 印象：8/10
✨My finalist are 【Static Electric Removable Adhesive】and【Laser + Matte Finish】. I chose the latter in the end for mass production since it gives a more impactful first impression. Even to a layman who may not be into arts, they can immediately feel that it's not something ordinary.
...or I just like bling bling effects too much ദ്ദി(˵ •̀ ᴗ - ˵ ) ✧
✨我最後是猶豫【靜電 R 膠貼紙】和【雷射+霧膜貼紙】。最後是選後者量產，畢竟他給人的第一印象比較衝擊，就算不懂藝術也能感受到他與眾不同之處
…也許我只是太喜歡這種閃亮亮的東西了 ദ്ദി(˵ •̀ ᴗ - ˵ ) ✧
100,000 (Part 2)
【2024/08~?】WIP - The Back | 過程 - 背面
Hold on hold on, don't leave just yet, I promise there's an interesting story of why this image was made, but bear with me as I take you on this longggggg journey of how we got here (¬ ͜ ͡¬) 等等等等等你先別走，我跟你保證這張圖會誕生是有原因的，但過程有點長，所以請聽我細細講解 (¬ ͜ ͡¬) Where it a...
※If you're not aware of this project, you may read about all the details of this project in the post above!
※如果對這個企劃一無所知的話，有關這個企劃的各種細節都寫在這篇文章裡了！
✨This was one of the example animation I made to communicate with the manufacturer in Japan.
✨這是我用來與日本廠商溝通用的其中一個示意動畫
✨This is one of the shrunken sample (A6) which I received from one of the manufacturer. The lenticular is implemented by hand in sampling phase (contrary to mass production, which will be aligned by machine and the result is supposed to be better), so I was expecting more flaws.
But this... Neither am I confident that it will look good even when it's implemented with machine nor can the manufacturer give me any promise on how much better it will be... The afterimage is just too severe for the inbetween frames.
This project is giving me tons of headaches and I'm afraid I don't have many solutions (ó﹏ก̀｡)
My plan right now is to:
Step 1. Modify the animation so that the range of movement is not as drastic.
Step 2. Bet on one of the other Japanese manufacturer to create a sample (which, to create a sample costs 50k JPY), and just fucking pray that the sample will be good for this project.
If that still doesn't work, my backup plan is to breakdown and cri first (¦3ꇤ[▓▓]
✨這是從其中一間廠商收到的縮小版樣品（A6）。光柵在樣品階段是手貼的（大量製作時則是機器對準，效果會比較好），所以我本來就預期現階段會有更多的偏差。
但這個……我實在沒有把握大量製作的時候效果會好，而廠商也無法跟我保證大量製作時效果會到我要求的那麼好…… 目前這個樣品中間隔的殘影問題真的太嚴重了。
這個企劃真的讓我好頭痛，而我也沒有太多好的解決方案(ó﹏ก̀｡)
我現在的計劃是：
Step 1. 修改動畫，將整體動態幅度調低
Step 2. 賭另一家日本的印刷廠來做樣品（但他們的打樣費是五萬日圓），豁出去花錢消災，祈禱他們做出來的樣品能讓我安心大量製作
如果這樣還是沒用的話，我的備案是總之先崩潰大哭一場 (¦3ꇤ[▓▓]
Atohs
✨The song is now available to play in RAVON!
✨這首歌現在在RAVON上玩得到啦！
Doodles | 塗鴉
✨Happy Birthday to Ice!
✨祝 Ice 生日快樂！
🤭+
✨Who knew this little doodle had more variations („ಡωಡ?
✨誰能料到這小塗鴉有更多差分呢 („ಡωಡ?
Tanline | 曬痕
💦
Tanline + 💦| 曬痕 + 💦
😚
😚+💦
Tanline + 😚 | 曬痕 + 😚
Tanline + 😚+💦 | 曬痕 + 😚+💦
🥵➜🌌➜😩💦
🥵➜🌌➜😩💦
Character Setting | 角色設定 | キャラクター設定 【Sand 🔵 沙子】: [📍FANBOX] | [🅿Pixiv] | [➤Telegram] 【Mutoh 🔴 武藤】: [📍FANBOX] | [🅿Pixiv] | [➤Telegram] 【Orbi 🟢 歐比】: [📍FANBOX] | [🅿Pixiv] | [➤Telegram] 【Duty Boy 🟡 值日生】: [📍FANBOX] | [🅿Pixiv] | [➤Telegram] Our Toy 🔒Part 14: https:/...
✨FANBOX finally added the pinned post function. Here's a post with all the links for easy access! 👊 ᷇ᵕ ᷆ )
✨FANBOX終於新增了釘選文章的功能，於是我做了一篇包含了所有連結的文章，供讀者方便使用！👊 ᷇ᵕ ᷆ )
✨Of course, I tried to turn that tablet thing into a sticker because I've been addicted to making stickers lately. It's a card sticker (the same size as your credit card), so you could stick it on a metro card or something of the same size. Unfortunately, the first iteration doesn't look good at all. If it ever becomes successful, I might consider mass producing it for future events ദ്ദി(˵ •̀ ᴗ - ˵ ) ✧
✨當然，我又試著把這平板做成貼紙了，最近有點做貼紙成癮。這是卡貼（跟信用卡一樣大），所以可以貼在捷運卡上之類的。很不幸的是，第一版看起來不太好，如果哪天做出滿意的樣子，我會考慮大量生產用在未來的活動上 ദ്ദി(˵ •̀ ᴗ - ˵ ) ✧
Doujin | 本子
✨This is where I spent the most time on this month! But there's very little to show for at the moment (´ . .̫ . `)
This is what bothers me about big projects, whether it be this Doujin, Atohs, or 100k event, you work your asses off (pun not intended), to the point where I'm busier than I was before I changed the monthly update schedule, but I somehow have even lesser to show for than I used to ʕ´• ᴥ•̥`ʔ.
For next month, I think I want to focus on finishing Our Toy (Part 14), so I have a bit more to show for!!!
✨我這個月主要時間都花在這部分上了，但我目前還是沒有什麼能給大家看的(´ . .̫ . `)
這就是大企劃的詛咒，不論是畫本子、Atohs、還是10萬的活動，儘管自己已經努力到爆，甚至比之前月更模式要來得忙碌，但相較於以前能給大家看的東西反而變得更少了 ʕ´• ᴥ•̥`ʔ
下個月我計畫專心完成Our Toy（Part 14），好讓我有更多東西給你們看！！！
✨Thank you for reading this loooooooooong post and for your continuous support, now I need a hug (っ`･ω･´)っ
✨謝謝你閱讀這篇打這麼多誰他媽看得完的長文，也感謝你一直以來的支持，我現在好需要一個抱抱 (っ`･ω･´)っ
