matmire_makes
patreon
Bonus Model: Bearded Dragon Fridge Magnets!
🕑 Added 2022-08-06 00:00:23 +0000 UTCHowdy!
I just added the new Bearded Dragon refrigerator magnet to the downloads post.
A fun little addon to your household or print shop. I like to throw one or two onto the print bed when other prints are going. They print quickly and use very little material (About 10 grams each, if you follow my settings suggestions).
Cheers!
Matt
**Download from the Pinned "Current Download Links" post**
A dab of super-glue on the back of a 10mm x 2.6mm neodymium magnet, like These On Amazon*** will fit securely into the slot on the back.
Print Settings:
- 0.15mm layer height (looks nice and smooth at this scale.)
- 3 walls with a 0.4mm nozzle (could do 2 walls with a larger nozzle.)
- 10% Lightning infill (lightning infill is great for these because it keeps the weight down and only creates infill where needed. Keeping the weight down helps the magnets be more effective.)
- 5-6 bottom layers (gives a little extra strength to the magnet attachment area.)
- If your printer struggles with bridging, you may need to add support inside the magnet slot. Give it a try without and see how it goes.
**Download from the Pinned "Current Download Links" post**
*As an Amazon Associate I earn from qualifying purchases
Comments
MatMire_Makes
I found the error in the mesh and fixed it. It should work now.
MatMire_Makes
I found the error in the mesh and fixed it. It should work now.
Natural
I also am seeing no hole. Slicing with Cura
MatMire_Makes
Do you have supports or brim turned on? It might be filling the hole.
Terry House
I printed this and it doesn't have the hole in the back for the magnet
