matmire_makes
patreon
Patreon Bonus: Bunny Rabbit Magnet!
🕑 Added 2023-03-05 01:42:53 +0000 UTCHey All!!
I just added the Bunny Rabbit Magnet to the downloads post. Enjoy!
Cheers!
Matt
Pictured Model printed in...
iSANMATE PLA+ Matte Rainbow***
**Download from the Pinned "Current Download Links" post**
*All magnets use 10mm x 2.6mm magnets like These On Amazon***.
Print Settings For Magnet:
- 0.16mm layer height
- 3 walls with a 0.4mm nozzle (could do 2 walls with a larger nozzle.)
- 10% Lightning infill (lightning infill is great for these because it keeps the weight down and only creates infill where needed. Keeping the weight down helps the magnets be more effective.)
- 5-6 bottom layers (gives a little extra strength to the magnet attachment area.)
- If your printer struggles with bridging, you may need to add support inside the magnet slot. Give it a try without and see how it goes.
**Download from the Pinned "Current Download Links" post**
***As an Amazon Associate I earn from qualifying purchases.
Comments
MatMire_Makes
Any super-glue should work. I like the ones that have a gel texture vs the more liquid ones.
josh jordan
Can you recommend a glue to keep the magnets in. Or does any old super glue work. I haven't had to glue anything yet
Kyle Foster
I think it would be really neat if you could do one of his feet as a keychain. Like the lucky rabbits foot keychains.
