matmire_makes patreon

Early Release: Bunny Rabbit!

🕑 Added 2023-02-25 00:46:40 +0000 UTC

Comments

Lioness2000

That's really awesome though. I would love to see your little guy. I haven't tried using that setting yet.

Lioness2000

Awhhhh!!! I love him! :)

Terri Trōtter

I am loving this design. Tried it with fuzzy skin and it looks great. Till I tried to move things. Fuzzy doesn’t work well with articulated joints. Anyone figure out a way to do fuzzy skin without the joints being fuzzy? Working on a bambu and using that slicer.

Scott

Same issue with the left arm and left leg joints not loosening .

MatMire_Makes

Ok, thanks for the feedback. I’ve heard that from a few people. I’m working on an update for that now. Just doing some test prints. Should be out soon!

cheryl banman

I printed 2 at 80% and everything is great except the left shoulder joint wont loosen broke one arm trying to loosen it. I tried on a different printer and same issue. just the left shoulder joint.

Jason P English

i have printed two bunnies and they came out awesome thank you

MatMire_Makes

That one is hand painted. It's not a multi color print.

MakersChoice

Do you have the 3mf file for the brown/white that you show on discord?

MatMire_Makes

Hi! Sorry you’re having a hard time with it. Can you send me some pictures so I can see if there’s something I can do to improve it? matmire.makes@gmail.com

Kelly Rapley

every bunny i print either one or both front legs break off

MatMire_Makes

Oh no! Can you send me pics? MatMire.makes@gmail.com

Cassie

I love this bunny but it doesn’t love me. Had two snap right above the shoulder joints 🥺

Frostbit Shadow

Here is our time-lapse for the bunny. Did a nice pink so my wife can give it away for Easter. Kind of bugs bunny style I took the little time to paint the mouth area white. https://youtu.be/FJSf9B1Eicg

Dave Hart

I'm in the same boat. As a proof of concept thing it is kinda cool. As a clean print it doesnt fall in line with the other models.

Chad Presson

Printed a few in cookiecad, there's just too many spots that touch (support) other parts and makes for a lot of cleanup if you don't want sharp spots. I mean its a cool idea having the model print like this, but there are some pitfalls as well. maybe its just me.

Sean John

I printed one and it came out well - head was definitely tough to break and thought I'd snap the entire piece off. Luckily it worked :)

MatMire_Makes

That definitely shouldn't happen. Would you mind emailing me some pictures so I can get a better idea of what might have happened? matmire.makes@gmail.com

Marco van Dam

I did a print at 75%. Only the head came out nice. Rest just broke off on touching it.

MatMire_Makes

Any chance you are using Cura and have "union overlapping volumes" unchecked? That would make the head connection very light. I'm working on a fix that would make that unnecessary, but for now that setting needs to be on.

Jack from Layer Makes

Great model but I've had two heads come off when trying to free the head. Wonder if it could be beefed up somehow?

MatMire_Makes

I love it!

Alexander Ramaker

I got a little carried away... https://www.pinterest.com/pin/1045890713441012690/

MatMire_Makes

I think 40%. I tried a 30% on the Bambu X1 but the elbows fused. Definitely pick strong filaments for attempting that small.

Terri Trotter

What is the smallest size anyone has successfully printed?

MatMire_Makes

I think this one was around 11-12 hours because I slow down the outer wall speed and printed the eyes in a different color. A single color print with those same print speeds would be about 9 hours.

Kellie

curious how long it took to print on the bambu?

John Michael

I Printed one overnight on a Ender 3 S1 Plus in Duramic Marble Pla. Joints were a little harder to get apart then your video but it came out great!

MatMire_Makes

big feets are cute! ...and help him hold himself up. :)

Johnny Wilson

I emailed you pics, they broke in the exact same spot

MatMire_Makes

I see. Silks can be super brittle, that’s why I push those joints inward toward the chest before trying to twist them. That helps avoid torsion stress to the layers. I show how I do this in the demo video that I linked in the post.

Johnny Wilson

Yes it was Amolen silk rainbow filament. I just barely moved them and they both snapped off in the same place close to the shoulders

Johnny Wilson

Both front legs snapped right off and I was using 25% gyroid infill

Johnny Wilson

I'm printing one right now, so far so good. I'm 85% done with the print and it's looking amazing so far

MatMire_Makes

Oh no! You can email me pictures. matmire.makes@gmail.com

Jared Eggleston

I printed this and all looked nice until the head fell off. It looks like it was not actually connected. How can I send you a picture of this.

Roberto Mello

I printed the little guy in 100mm Z. Is there a reason the front paws are big, like he is wearing boxing gloves :-)

Kayla

Just finished printing it, and I love it! It printed really well. And all of the joints freed up nicely.

Jason Mooney

The video you posted is for the Axolotl Head.

Jason Mooney

The right rear leg wouldn'y break free, and twisted off

Jazzy Plz

Mat's stuff has historically been really easy to paint because of the clean sculpting. I dunno how needed it really is when it only takes a few minutes to do it. and the majority don't print dual colors.

Jason Mooney

I decided to try another max size for the Bambu, just a single filament. It will take over 14hrs.

TheArtifactWorkshop

Hey! I was wondering if you would be willing to share your Bambu 3mf files going forward? Almost nothing to paint on this little guy, but maybe on more complex models? Anyway, you could just save it along with the STL in the download folder. Some other content creators have started doing it (since Bambu is taking over!!) and its handy to open it ready to go without either of us doing more work. Thanks!

Jason Mooney

I started a little behind schedule, but I have this adorable rabbit started. https://www.twitch.tv/cooltechdesigns. 11hr31m for the colored details, 7h46m for just the eyes colored. Using CookieCAD Unicorn for the body, silk red for the irus, and a nice dark super glittery purple for the pupil. Almost forgot white for the bushy tail.

Justin Marino

Mines already hit the printer first layer looking good

Mathew Pini (Prints by Pini)

So cool my wants the head for magnets please

Laying Layers

So amazing!! Can you make a version with antlers??!?

Stephan Langer

Some members of testing group successfully printed this model down to 50% scale, but YMMV.

Jordan Dukeman

Can this model be scaled down or haven you not tried that? :)

MatMire_Makes

That's Ziro Macaron! I put a link in the post

R&D 3D Printing

What’s the filament you used? Great Easter colors.

Courtney

Oh my gosh. I joined your Patreon this morning because my son loves the axolotl we printed so much…but he is obsessed with bunnies (he’s 6). You just made his day (week, month, etc). Thank you!! (He also said “when is he going to do an aye aye, kids are never satisfied).