matmire_makes
patreon
Patreon Bonus: Jakalope Magnet!
🕑 Added 2023-04-11 17:15:22 +0000 UTCHey All!!
I just added the bonus Jackalope Magnets to the downloads post. This one is a little different than the other magnets. In order to avoid the need for supports, it does not print on it's back like the others. As a result, It has two flat spots with cutouts for the magnets. Yay for options!
Enjoy!
Cheers!
Matt
Pictured Models printed in...
Deer antlered...
CookieCad Sunrise***
ProtoPasta Scarlet Symphony
Pronghorn antlered...
Amolen Thermal Color Change***
**Download from the Pinned "Current Download Links" post**
*All magnets use 10mm x 2.6mm magnets like These On Amazon***.
Print Settings For Magnet:
- 0.16mm layer height
- 3 walls with a 0.4mm nozzle (could do 2 walls with a larger nozzle.)
- 10% Lightning infill (lightning infill is great for these because it keeps the weight down and only creates infill where needed. Keeping the weight down helps the magnets be more effective.)
- 5-6 bottom layers (gives a little extra strength to the magnet attachment area.)
- If your printer struggles with bridging, you may need to add support inside the magnet slot. Give it a try without and see how it goes.
**Download from the Pinned "Current Download Links" post**
***As an Amazon Associate I earn from qualifying purchases.
Comments
Tricia
Any chance these can receive a captive update?
Kyle
Just scale it up
3D Printer Friends
going to eventually need a wall mount version
ruth knag
we are new to this group. after seeing this I jumped on the amazon link and bought magnets! thank you.
Jason
Yuuuup!
