zou3d
patreon
Baby Scorpion
🕑 Added 2025-07-12 00:44:48 +0000 UTCHello friends! Here's the baby scorpion!
For the model in the pic, I printed it at 150% of its original size. For smaller versions, I tested it to 80%. Just a reminder, I run my tests using old filament to make sure everything prints well under real conditions!
Files in the first link of this post
File available on our Google Drive, you can download it from the first link in this post.
Download -> https://www.patreon.com/posts/zou3d-info-and-70316220?
The files are also attached to this post!
If you have any questions, feel free to ask our support team!
This model has:
Multicolor 3MF files
Print in parts
Keychain
Print Settings:
Wall line count: 3
Infill: 25%
Filaments:
https://www.esun3d.com/pla-pro-product/
Brown
https://www.esun3d.com/epla-matte-product/
Black
ZOU3D ❤️
Comments
Mitch Brink
NO! Mothman first! :)
Kayla Schroeder
They are not all the same size. What I do is picked the unicorn to size all the others to. Then, for me, they are all about the same size.
Andreia Bittencourt
Would be amazing if you could make the zodiac!!
Leanne Wicks
Does everything print at the same-ish size? If I print everything at full scale will it look like a cohesive set or do I need to scale some of them down to match? Thanks for any input.
