Marrion
patreon
Gondorian Ifantry Sword
🕑 Added 2023-07-30 14:32:10 +0000 UTCI try to make it look nice =)
This model is currently available for free for Patrons in the Patreon Store until the release of Fountain Guard Spear. So if you are thinking of printing this sword for yourself in the future, do not forget to save the files to yourself =)
Here is the sword in the Patreon shop
All parts of the sword should be printed separately and then glued onto the finished sword (the model has special grooves for easier gluing).
There are six variants of swords:
1 - not cut smooth
2 - not cut detailed
3 - cut into few parts smooth
4 - cut into few parts smooth with rod holes
5 - cut into few parts detailed
6 - cut into few parts detailed with rod holes.
If you need extra strength for a piece sword printed, you can print a version with rod holes. The rod can be metal for example. Holes are made for a rod with a diameter of not more than 5 mm
In the cut version, the parts should be printed separately and then glued, the joint is equipped with a recess for easy gluing.
All parts of cut version of sword can be printed on printers with a printing area of 200x200x200 mm.
Sword wall holder dimensions:
height - 434mm
width - 275mm
thickness-16.6mm
Sword and the scabbard dimensions:
full length of the sword in the scabbard: 926mm
length of the sword without scabbard: 919 mm
length of the blade: 733mm
length of the scabbard: 741mm
Comments
Marrion 3d
Renders are new, but the models are completely the same
Wim D.
For clarity: the files available in the Patreon shop are identical to the files released a few months ago on Patreon itself? Or are there updates/new variants/new renders?
