M3DM
patreon
3D Printing Toolkit : Part 1 - Resin Post Processing
🕑 Added 2023-05-08 17:00:07 +0000 UTCHello Everyone!
When you first get into 3D printing, it is easy to think you just need a 3D printer and resin. There are a lot of little tools that can greatly improve your 3D printing experience. Here is Part 1 of my toolkit covering resin 3D printing!
All links below are Amazon Affiliate and benefit me if you purchase. That being said, I can create links for anything on Amazon. I picked everything on this list because I've used them!
πΉ VIDEO WALKTHROUGH : Click here πΉ
If you are more of a visual person, I have a video showing how I use all of these tools too! Make sure to use gloves and have a mask when sanding.
π οΈ Mia Kay's 3D Printing Toolkit for 2023 : PART ONE π οΈ
1οΈβ£ STEP ONE : Cleaning Goodies!
For IPA you can use 91% too, it doesn't need to be 99%. The IPA wipes are nice for cleaning your workspace. You can just dab IPA on a papertowel too. I like having some sort of mat for my workspace too. I just grab a cheap one off Amazon which is normally used under dog water bowls. I use the funnel and filter to strain the resin from my vat whenever I change colors or have large print failures.
Nitrile Gloves : https://amzn.to/3nAfdfX
IPA : https://amzn.to/41iue49
IPA Wipes : https://amzn.to/3nvtwCs
Paper Towels : https://amzn.to/3nugdCq
Silicon Mat : https://amzn.to/42oZMpA
Paper Filters & Silicon Funnel : https://amzn.to/3p5fMik
2οΈβ£ STEP TWO : Cure Your Prints!
You can use the sun or any UV lamp, even a UV nail lamp. I just like the convenience. It spins around and it is lit from the top and bottom. I feel like I get a much more even cure using the station. All brands of cure station seem fine to me, I've used Elegoo & Anycubic. Pick your favorite!
Cure Station : https://amzn.to/413eFNl
3οΈβ£ STEP THREE : Sanding!
Sometimes you have little support marks or imperfections. These are my tools! The snips I use to remove supports, and the rotary tool is for smoothing down any marks/imperfections. Another little tip : if you have pock marks from supports you can fix that too! By pock marks I mean little holes. Just dab a little bit of resin with a paintbrush, cure it with your UV lamp, and then sand it down. Fixed!
Snips : https://amzn.to/42oRs9q
Rotary Tool : https://amzn.to/44lqaml
π οΈ Need More Help?
More topics I've covered linked below!
You can also ask me questions in Our Discord :)
π οΈ Flexible Build Plate (highly recommend!)
π Slicer Settings
β Upcoming Topics!!
Feel free to request more topics!
- Tips for Easy Support Removal
- Safety Tips for Resin
- Troubleshooting 101
- FDM Slicer Settings
- Common Mistakes
- Disposing of Dirty Resin IPA
Comments
M3DM
Excellent suggestion! I will cover that!
SteveB
I would really like to see your post on "Calibrating your resin 3D printer" as I just got 2 new ones and haven't set them up yet. Thanks!
