Mr Carlson's Lab
patreon
Solder Circuit Boards Like a Pro! Here Is Mr Carlson's Method.
🕑 Added 2019-11-13 07:47:26 +0000 UTCHere is an easy technique to solder SMD components, and get professional results. I also share my favorite soldering iron tip part numbers, a great optical magnifier, and more. Enjoy!
Here is a link to the list of video's here on Patreon, NEW LIST of Videos: https://www.patreon.com/posts/8239565
- To expand this post, click the large black video title.
- To see all the comments, click the "load more comments" tab at the top left of the comments section multiple times until the number at the right top stops counting.
Comments
Eric
The benefit of 63/37 is not the 3% reduction in lead, but that it quickly transitions from molten to solid state at its 361F melting point. You don't need to wait as long as you do for 60/40 to set up. The only time I've seen cold looking solder joints has been if the tip, part, board/terminal was not clean before attempting to solder the joint. I've been using 63/37 for decades in manufacturing and repair bench contexts, stuff that goes in airplanes...
Ryan Dunbar W1RMD
Stay away from 63 37 solder unless you like stuff that doesn't flow and give cold looking joints. It's not worth "saving the world" by reducing you lead content by a lousy 3% to give dull brittle solder joints. Sorry so rash, but STICK WITH 60 40 unless silver solder is required!
LoSaYa
Great Info. Thank You
