Mr Carlson's Lab
patreon
- Part 2- Component Knowledge- Recognize Components That Are "Electrically" Tricky.
🕑 Added 2021-05-15 23:17:26 +0000 UTCHere are some tricky components that will cause all sorts of issues if installed into the wrong circuits. Here's what to look for and recognize. Enjoy!
If you're enjoying these video's, let me know by tapping the heart symbol below.
Here is a link to the list of video's here on Patreon, NEW LIST of Videos: https://www.patreon.com/posts/8239565
- To expand this post, click the large black video title right below the video.
- To see all the comments, click the "load more comments" tab at the top left of the comments section multiple times until the number at the right top stops counting.
Comments
John Robertson
Worked for a company that made stand alone controles for industrial use, Early 1970's Led status lights to indicate status of device on/off. An 1970s flash camera was used to take and picture and fried the CPU. All of the LEDS were red. Also the eprom was also Photo sensitive, Thats when the Foil cover was used to completely cover Eprom windows.
Ryan Dunbar W1RMD
Take it from my personal experience, DON'T check to see if wire wound resistors are getting hot by touching them while they have high voltage on them. The insulation is VERY thin in parts and THEY BITE! Thanks for the video!
