cinderwing3d
patreon
Cinder Community MODS! Bonus models! Crystal Tadling
🕑 Added 2022-09-21 06:12:45 +0000 UTCHi Cinders!!!!
We have some fun MODs made by Cinders!! Massive thanks to all of these creators! Their work is creative and very exciting to add the Cinder Exclusive models accessible through our Community!!
Please read the MODS Section Below for questions on modifying files.
These MODS fall under the same Commercial Licensing as other Cinderwing3D files. With active subscription you have the license to sell physical prints commercially, but never the digital files.
1. Tadling : By BeaconHouseFab
"Crystal Tadling. I've included two versions--with and without a keychain ring hole. This print is pre-shrunk to roughly 10.5cm long; the perfect size for a keychain / backpack charm! It can be scaled up, but looses it's cuteness factor (in my opinion) if you go too large.
The Inspiration:
My kids LOVE Cinderwing3D dragons--and so do I! While prepping them for school one day, I started wondering how I could send something cute and unique with them: enter the Baby Crystal Tadpole (Tadling) Dragon! He's small enough for little hands to hold, and is the perfect size to put a standard keyring on and attach to a backpack. :)
Print Settings:
These print lovely at the standard Cinderwing print settings: 3wall, .2mm layer height, and 10% - 20% infill. Since they're small, I like a slightly lower layer height (.16 is wonderful). Since they are small by design, a well-tuned printer will work best. The best part: they only take 4 hours or so to print!
About Me:
I discovered 3D Printing during the pandemic and fell head-over-heels into this new "hobby". Less than a year later I have 7 printers and love introducing others to printing as well as bringing 3D printed creations to the others! You can find me on TikTok: @BeaconHouseFab, and on Etsy at http://store.beaconhousefab.com ."
2. Dragon Chains: By Fuszybear
"There are 9 different designs of dragon segments. Each is slightly scaled to be the same size as each other and can all be interlinked with each other. The best one in my opinion is the rose which will require around 20 segments to make a bracelet. I don't recommend printing it with resin or filaments that you find to be brittle.
I have printed a few links of each and they all seem to make good bracelets but their lengths vary. Some like the Dunestriker segment will take fewer sections and others like the flying serpent will take more.
There are two that are natural "backwards" and don't work well with the others and that's the jellyfish segment and the Dunestriker."
3. Dragon Head Wall Mounts ADULTS and BABIES: By Patch
Patch has been apart of the Cinderwing3D community since the very beginning and has played a very big roll in testing models before release as a Cinderwing3D Tester. He was excited to make these modifications for all Cinders to use and included BOTH Adult and Baby heads!
---------------------------------------------------------------------------------
Modifying Files:
We love people having the flexibility to modify files to make unique items, such as Dragon Head Planters, for their personal shops. HOWEVER, ALL MODIFICATIONS MUST BE APPROVED THROUGH US. Please send us a message, through our support email or Discord ticket, with what you would like to do and if it does not conflict with our current design plans or copyright we will approve it. If modifications have already been made, please cease production and send us a photo for us to review. (Any request to create an entire original creation from current models OR the mesh of another artist’s work will not be approved)
These modified designs are for your own personal use, and as PHYSICAL PRINTS can also be sold in your shops through the Commercial License, WITH DESIGN CREDIT to Cinderwing3D's Original Design. The digital files (Originals and Modified) are NEVER to be shared or re-sold. If you would like the Cinderwing3D Community to have access to the modified file, we thoroughly appreciate that, and will work with you to make them available to the other supporters!
-------------------------------------------------------------------------------
September Models:
- Harvest Lurker (Released)
- Harvest Lurker, Resin and Giant Versions (Released)
- Bonus Community MODS (Released)
- Hollow Dragon RESIN wings (In Testing)
- Secret Design (In Testing)
- Baby Hollow Dragon EXCLUSIVE (In Testing)
- Secret EGGclusive Design ;)
- UPDATE of Original Cinder Snake and Straight Layout (Released)
Next SEPTEMBER Model will be released shortly!!!
--------------------------------------------------------------------------------
Please see WELCOME POST for questions and links: https://www.patreon.com/posts/welcome-to-info-71819754
- Please join our helpful Discord chat HERE:https://discord.gg/zAGfhWNC
- To get in contact with us via Email (support@cinderwing3D.com) OR faster through a Discord ticket!
Thank you, Cinders for your support!!! And Thank you to our Admins and Test Team for all your hard work!
- Tracy and Richie
Comments
Tracy Francis
Hi there, the files are attached to the post, you don't have to purchase it
Lorianne
I feel like I’m missing something important (but I’m also on my phone so might not be seeing it). I want to purchase the Tadling in the main picture (purple) - usually I see option but I don’t. Am I missing something? Thanks!
Tracy Francis
they should yes
Alakay Ria
Do the chains just snap together? Im worried about them not staying snapped together.
Victoria Tallack
ive printed a head, but how do i attach the part for a keychain?
Kimiko Fox
New here, just wondering if there is a version of the head mount that I can put a magnet into? OR will go on the end of a pencil/pen?
Print3dReality
I have been successfully print them at 60% and all parts move. They are incredibly cute at the tiny sizes!
Tracy Francis
more coming!!!
Laura Buff
ALSO voting for making MORE Tadlings. If printed at 70%, it still moves well at .2 layer, like an hour and 30 time print, so great and the kiddos are going crazy for them.
Jill Woolsey
Please make more tadlings. These are so perfect for quick prints and kids love them.
Dave's Dragons
So make first and then submit request or send request first?
Tracy Francis
i do not believe so!
Tracy Francis
This is a great idea but the Mod would still have to be approved through our team. Please email us or open a discord ticket! :)
Dave's Dragons
I wanted to ask if we have permission to make tadlings out of the rest of the adult dragon models? Or are we limited to only using the Crystal one included here?
OVanH
Love them!
3DPaynee
I can't wait to print all these out!
Keaton Hammack
Do the chains need supports to print?
The Broken Rōjin
Love the head mounts! I was actually about to print something like that for my office
Kwas's Kreations
Thank you for these amazing models! You keep surprising all of us! I love the ideas!
