Archived August Model

How do I download these files?

al

man.. i really wanted this one.....

I'm having quite a bit of trouble with this print now too. I've had one winged one print successfully at 80% scale with no brim (aside for a brim for the wings) I have tried the non winged one at 80% and did get a full print but it was very brittle at the links and broke when I popped it off my spring plate (Although it has the identical settings to the successful print.) I have since tried adding a brim to the body as well and beefing up my walls/infill but nothing seems to be working. Fails on 3 different printers now. Hmmm

Dustie Chase

should be in the archive link they usually send an email. at the end of the month

Im having a hard time finding the file for this on patreon, do i need to buy the file on cults or am i just looking in the wrong spot?

ThatsCooliNeedit

these look great on paper but good lord the failure rater is higher than gas prices.

Mario Murga

There's gotta be an easier way to navigate through this and download any given design

Same here.... New so I am not understanding.

im having the same problem

wait am i no longer able to get the design?

William Hargraves

I don't think it's the file I own a original ender 3 without any upgrades on it besides heavy bed spring , I can print the hollow dragon fine . Currently printing another winged version on my anycubic Kobra and everything seems fine so far . Jason makes a good point of using z hop I like to make it the same as my layer height so it will never hit the print . Also check your retraction and temp if your temp is too hot the layers will sag and won't sit on top of each properly

I'm about to epoxy these wings in position. Nothing I do seems to hold them in place

Jason

I have had multiple fails on the bone extremities within the first 15% of the print. Mostly in the tail section due to it curling up on the very fine tips. However, I've had 3 successful dragons finish, as well, and they look amazing. I have one winged version printing right now and used a 6mm brim and its been flawless the whole time. A little z hop helps if you're worried about the nozzle colliding with the prints and knocking them off.

Kieran

Anyone have any answers on how to keep the wings spread out yet? I'm not sure how much testing this thing went through but it doesn't seem as easy as is made out, the other models have been fantastic but these wings are a bit of nightmare for me

Candice

We are on print number 5 fail of this dragon. We have tried the ender 3, voxlab, and cr10. Non stop fails. We literally loaded it on the printer an hour after it released and have not had one successful print. Every other file has printed with CinderWing3D so it’s not the printers. Anyone else struggling?

Melissa Pullen

Can someone please explain to me how the wings stay spread out and up. Mine just fall down. I can't figure out what I am missing here. TIA

SirPrintsAlot3D

The wings are so hard to get in and painful because there's so many sharp bits in the print. They don't rotate as much as I would have liked, maybe printing at 99 percent would help

Hoof 'n Horn Diceworks

i made spaghetti with my first try at the wings lol, gonna add a brim this go

Torquebolt

If anyone is having issues putting the wings in, don't try to push the straight.go in at about a 45 degrees and and turn the ball while you do.