cinderwing3d
patreon
EXCLUSIVE MODEL - Coral Reef Dragon
🕑 Added 2022-09-11 09:52:28 +0000 UTCFDM Settings
3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues
Resin Settings
No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.
Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town
testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.
Comments
Tracy Francis
Clean your bed really well and use brims :)
erika barrow
do you have any tips for getting the wings to not move during print
Tracy Francis
As stated in my tier before you subscribe, on subscribing you have access to the Welcome Pack for free with sub, anything not in the welcome pack is purchasable. :) This model is in the welcome pack, so you get to download it. Please take a moment to read the welcome and info post for more information: https://www.patreon.com/posts/welcome-to-info-71819754
erika barrow
How come some can be downloaded but others can’t?
Tracy Francis
All my models are tested between 60-100% :)
John Goedeker
Has anyone tested this one at like 60-75%?
Tracy Francis
This was so long ago it might not be around anymore honestly!
Jessi Young
I tried to find the filament you said you used but it's not bringing up the right color pattern :(
Tracy Francis
Hey there, you can ignore those, they do not affect the print, thank you!
shade emry
I fixed the model, i found 50 degenerated faces and a load of self-intersections and 8 duplicated faces. I love this model! so pretty
Si11yGohan
Cura has problems with certain files and I just don't know why. I have run into this problem with a lot of different larger files.
Jennifer Estlund
I cannot get this one to slice in Cura. It fails. I've downloaded it twice now. Ideas?
carson
what filliment do you use
Jazzy
No supports are needed
Emily Weeks
Does this need supports? My slicing thing is saying that some of the areas basically would go wrong. What should i do?
Katie Nickerson
I'm SO excited for this one... my little dragon-loving marine biologist heart is SINGING
Tony Scott Madson
Awesome models! How can I show you my prints. They are resin and they look like gummy candy. And they are blacklight active too.
paulene schmedeke
I've struggled with this one. Change machine,infill all I could think of.But the tail fins weight n head ect did not handle.being removed from print plate.
Tracy Francis
thank you!
Tracy Francis
sunlu silk rainbow :)
Skyrocket Cards
What filament did you use it is beautiful
Tracy Francis
All these exclusive files are the same, except the Snake has been updated! These files are no longer available on our website but will remain on here with easy access links from the pinned post! All new Exclusives will remain on here as well! :)
Jocelyn Kessinger
Any of the exclusive models that were posted last night different in anyway than the files we already had access to on your site? I don't want to miss anything but I also don't want to download files I already have. Thanks!
